Sanitary Centrifugal Pump
Max. Flow:
74m³/hr
Max. Head:
100m
Max. Temp:
180°C
Material:
Metal
Sanitary Self Priming Centrifugal Pump
Our Sanitary Self Priming Centrifugal Pump, crafted from AISI 316L Stainless Steel with an electro-polished surface to Ra > 0.8, delivers hygienic and food-grade excellence, making it ideal for Sanitary applications in the Food & Beverage, Pharmaceutical and Chemical industry. Specifically designed for applications requiring suction lift up to 4.5m, this Sanitary Centrifugal Pump is self-priming, with the added benefit of being ATEX available for use in hazardous environments. Featuring FDA-approved seals, high finish and superior mechanical strength, our Sanitary Self Priming Centrifugal Pump meets the demands from Food and Sanitary applications.
Typical applications for our Sanitary Self Priming Centrifugal Pump:
- Dairy
- Fats
- Juices
- Food additives
- Ingredients for Cosmetics and Pharmaceuticals
- Products in explosive and safe zones
- Mild and aggressive chemicals
- Hot and cold liquids
- CIP, cleaning and washing agents
- Wastewater
- Feeding and unloading of storage tanks, containers, filters and sumps
- Powering process equipment, dosing systems and dispensing units
Features & Benefits
- Electro-polished surface to Ra > 0.8
- Suction lift up to 4.5m
- ATEX available
- FDA-approved seals
- Self-priming
- Easy installation and maintenance
- Ideal for highly aerated liquids
- Simple and compact design
Specifications
| Materials | Stainless Steel AISI 316L |
| Max Capacity | 58m³/hr |
| Max Pressure | 40m |
| Self Priming | Yes |
| Max Solids Size | 6mm |
| Max Temperature | 90ºC |
| Viscosity | 0-200+ cSt |
Options & Variations
Standard Single Mechanical Seals: provided with a range of face materials, Ceramic/Graphite/SiC and O-Rings are available in EPDM/FKM/FFKM or FEP or alternatively, the seal can be provided with an OP-Ring (Square O-Ring). This increases the friction between the O-Ring and the back casing and therefore lowers the chances of the static parts of the seal from sticking together.
Lubricated & Externally Quenched Mechanical Seals: can also be provided upon request and are ideally used when there is the potential for dry running or where there is a chance for the product to solidify or crystallise. An oil pot is connected to the seal chamber and continually lubricates the seal during operation. SAE Grade 20 oil is recommended however you must use a fluid compatible with the pumped medium and materials within the pump.
